1. Product Introduction of HSMB10085 Common Mode Chip Impedance Inductor
HSMB10085 Common Mode Chip Impedance Inductor is hollow coils, or coils with magnetic cores, which can only pass through smaller current and withstand lower voltage. And the power inductor also has hollow coil, also has the magnetic core, the main characteristic is wound with thick wire, can withstand tens of amps, hundreds, thousands, even tens of thousands of amps.
The power patch inductor is divided into two types with and without a magnetic mask, mainly composed of magnetic core and copper wire. In the circuit mainly play the role of filtering and oscillation.
Our high-quality SMD common mode inductance solves low-mode noise signal suppression interference sources for customers, improves productivity and quality reliability in installation, and is favored by Chinese and European customers.
2. Product Parameter (Specification) of HSMB10085 Common Mode Chip Impedance Inductor
|
HSMB10085 Common Mode Chip Impedance Inductor |
|||||||
|
1. Five-ring pattern and size (SHAPE AND SIZE) (unit mm) |
|||||||
  |
|||||||
| Five ring number | A | B | C | D | E | ||
|
HSMB465516 |
4.6±0.3 |
5.9±0.3 |
0.5 REF |
1.0 REF |
1.8±0.3 |
||
|
HSMB508505 |
5.0±0.3 |
8.5±0.3 |
1.0 REF |
1.5 REF |
5.0±0.3 |
||
| HSMB750603 |
7.6±0.5 |
6.0±0.3 |
2.5 REF |
1.5 REF |
3.2±0.3 |
||
| HSMB100805 |
10.0±0.3 |
8.0±0.3 |
1.8 REF |
1.5 REF |
5.0±0.3 |
||
| HSMB121006 |
12.0±0.5 |
10.0±0.4 |
3.5 REF |
2.0 REF |
6.0±0.3 |
||
|
Five ring number |
L |
Rated |
Common Mode Impedance(Ω) ref |
DCR |
||
|
(uH)min |
Current |
mΩ |
||||
|
Part No. |
1KHZ 1V |
(A) |
1MHZ |
50MHZ |
100MHZ |
max |
|
HSMB465516-151 |
4.0 |
2.0 |
15.0 |
100.0 |
150.0 |
60.0 |
|
HSMB465516-351 |
7.0 |
2.0 |
50.0 |
350.0 |
350.0 |
70.0 |
|
HSMB508505-202 |
10.0 |
2.5 |
50.0 |
2200.0 |
1000.0 |
75.0 |
|
HSMB750603-601 |
10.0 |
2.0 |
70.0 |
500.0 |
600.0 |
45.0 |
|
HSMB750603-701 |
15.0 |
2.0 |
75.0 |
600.0 |
700.0 |
50.0 |
|
HSMB100805-701 |
5.0 |
4.0 |
20.0 |
400.0 |
700.0 |
40.0 |
|
HSMB100805-901 |
6.0 |
4.0 |
40.0 |
600.0 |
900.0 |
45.0 |
|
HSMB121006-801 |
18.0 |
5.0 |
80.0 |
850.0 |
800.0 |
25.0 |
|
HSMB121006-601 |
25.0 |
5.0 |
100.0 |
900.0 |
300.0 |
35.0 |
|
HSMB121006-501 |
50.0 |
5.0 |
150.0 |
800.0 |
500.0 |
45.0 |
3. Product Feature And Application of HSMB10085 Common Mode Chip Impedance Inductor
HSMB10085 Common Mode Chip Impedance Inductor is line filters suppressing conductive noise ranging from low to high frequencies generated at power supply circuits of various electronic equipment;
Application:
Suppresses noise in DC circuits for switching regulators;
Protects primary AC side form affected by a switching regulator;
Filters noise emitting form Ultrasonic equipment;
Filters electrostatic noise form Power and signal lines;
Eliminates contact noise; Filters incoming spike noise for IC and equipment using microcomputers;
Minimizes noise emissions for conforming to FCC,VCCI,FTZ, CISPR, JTTC and VDE; Applied
Equipment: TV,VCR,Switching Power sources ,NC machines,Computer systems, peripheral units and Measuring instruments.
4. Product Details of HSMB10085 Common Mode Chip Impedance Inductor
Characteristics: Inductance range: Up to 30MH ; Current up to 15 Amps; Many style available; High levels of safety and reliability; Easy PC Board Mounting; Available as verticallyor horizontally mounted; Rated current :Base on temperature rise not to exceed at 40℃.
5. Product Qualification of HSMB10085 Common Mode Chip Impedance Inductor
HSMB10085 Common Mode Chip Impedance Inductor
Insulation: AC 2000V 1 minute between line and line; Insulation Resistance: 100mΩ min when DC 500V between line and line.;The product has stable quality, high power, low temperature rise, small size and short height compared with plug-in in the following figure. The quality of SMD common Mode inductance products can be guaranteed for more than 5 years, which is trustworthy.
6. Deliver, Shipping And Serving of HSMB10085 Common Mode Chip Impedance Inductor
Our HSMB10085 Common Mode Chip Impedance Inductor generally have a domestic delivery date of 10 working days; The foreign delivery period is 20 working days. Our products are packed in three-level packaging. The packaging is firm and reliable, which can effectively protect the products from falling.
